Select vehicle

Make
  • ALFA ROMEO
  • AUDI
  • BMW
  • CADILLAC
  • CHEVROLET
  • CHRYSLER
  • CITROËN
  • DACIA
  • DAEWOO
  • DAIHATSU
  • DODGE
  • FIAT
  • FORD
  • HONDA
  • HUMMER
  • HYUNDAI
  • INFINITI
  • ISUZU
  • JAGUAR
  • JEEP
  • KIA
  • LADA
  • LANCIA
  • LAND ROVER
  • LEXUS
  • MASERATI
  • MAZDA
  • MERCEDES-BENZ
  • MG
  • MINI
  • MITSUBISHI
  • NISSAN
  • OPEL
  • PEUGEOT
  • PORSCHE
  • RENAULT
  • ROVER
  • SAAB
  • SEAT
  • SKODA
  • SMART
  • SSANGYONG
  • SUBARU
  • SUZUKI
  • TOYOTA
  • VAUXHALL
  • VOLVO
  • VW
  • Show more...
Model
Type
Category:

Suspension

Category

Manufacturer

Remove all filters

Suspension

45 148 products
Protective Cap/Bellow, shock absorber FEBI BILSTEIN 02557FEBI BILSTEINProtective Cap/Bellow, shock absorberFEBI BILSTEINArt-Nr: 02557Inner diameter [mm]: 54,0 mmOuter diameter [mm]: 67,0 mmOuter diameter [mm]: 75,0 mmQuantity: 20Additional Info: : 1.880.115, : 7.8115, for shock absorber, intended and not modified for purpose. Please ensure the, Multifunction thermo switch MOUNTABLE in thermostat housing, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2000-48S, These products are designed to be used as originallyFitting Position: Front Axle left and rightWeight [kg]: 0.032 kgMaterial: PlasticColour: BlackLength [mm]: 84 mm
£0.52
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 08017FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 08017Additional Info: for shock absorber , These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.Weight [kg]: 0.08 kgFitting Position: Front Axle left and rightThickness [mm]: 90 mm
£3.22
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Power Steering Oil FEBI BILSTEIN 46161FEBI BILSTEINPower Steering OilFEBI BILSTEINArt-Nr: 46161Content [litre]: 1 lQuantity: 12Additional Info: 1.880.790, 7.8790, for hydraulic central, power steer.+ level control system, intended and not modified for purpose. Please ensure the, Lock : 660146, Multifunction thermo switch FITTED into thermostat housing :, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2009-80BS, These products are designed to be used as originallyWeight [kg]: 0.95 kgColour: Green
£8.77
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Automatic Transmission Oil FEBI BILSTEIN 08971FEBI BILSTEINAutomatic Transmission OilFEBI BILSTEINArt-Nr: 08971Content [litre]: 1 lQuantity: 20Additional Info: for autom. transmission,converter and hydraulic steerings, intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Size : 250 ml(33 mono dosi), Supplied until depletion, These products are designed to be used as originallySpecification: Ford WSS-M2C186-ASpecification: Ford WSS-M2C166-HSpecification: Allison C3/C4Specification: Ford WSS-M2C185-ASpecification: Ford WSS-M2C138-CJWeight [kg]: 0.93 kgSpecification: DEXRON II DSpecification: MAN 339-V1Specification: MB 236.5Specification: MB 236.1Specification: MB 236.7Specification: MB 236.2Specification: MB 236.6Specification: MAN 339-Z1Specification: Suffix AColour: Red
£6.47
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 03663FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 03663Quantity: 10Additional Info: : 1.880.115, : 7.8115, for shock absorber, intended and not modified for purpose. Please ensure the, Multifunction thermo switch MOUNTABLE in thermostat housing, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2000-48S, These products are designed to be used as originallyWeight [kg]: 0.092 kgFitting Position: Front Axle left and rightMaterial: Elastomer
£1.15
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension SWAG 10750002SWAGRubber Buffer, suspensionSWAGArt-Nr: 10750002Inner diameter [mm]: 115,0 mmInner diameter [mm]: 79,0 mmOuter diameter [mm]: 121,0 mmQuantity: 10Thickness [mm]: 23,0 mmThickness [mm]: 48,0 mmAdditional Info: 1.880.344, 7.8344, for coil spring, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., See Also VR-D674H for 8Amp Field Version, These products are designed to be used as originallyWeight [kg]: 0.255 kgColour: BlackMaterial: ElastomerNumber of Knobs: 4Fitting Position: Front Axle
£2.94
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Power Steering Oil FEBI BILSTEIN 06162FEBI BILSTEINPower Steering OilFEBI BILSTEINArt-Nr: 06162Content [litre]: 1 lQuantity: 12Additional Info: Repairs: VR-H2009-40, 1.880.497, 7.8497, for central hydraulic system, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., These products are designed to be used as originallyWeight [kg]: 0.98 kgColour: Green
£6.72
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Seal, suspension strut bearing FEBI BILSTEIN 12701FEBI BILSTEINSeal, suspension strut bearingFEBI BILSTEINArt-Nr: 12701Quantity: 10Additional Info: Block Coil; (4 Pin; With Parallel Connections), for strut mounting, , intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., RPM to [1/min] 6800, These products are designed to be used as originally, With Comfort FunctionWeight [kg]: 0.001 kgFitting Position: Rear Axle left and rightMaterial: PaperColour: Black
£0.24
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Threaded Sleeve, suspension strut FEBI BILSTEIN 02159FEBI BILSTEINThreaded Sleeve, suspension strutFEBI BILSTEINArt-Nr: 02159Quantity: 10Thickness [mm]: 13,0 mmAdditional Info: Double Bowden, for strut, , intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Resistance Rotor [Ohm] 5000, These products are designed to be used as originally, Without BracketWeight [kg]: 0.016 kgFitting Position: Front AxleInner thread [mm]: M14 x 1,5 mmOuter diameter [mm]: 19.5 mm
£0.74
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension VAICO V20-7374VAICORubber Buffer, suspensionVAICOArt-Nr: V20-7374Packaging height [cm]: 6,2 cmPackaging width [cm]: 6,2 cmWeight [kg]: 0,097 kgAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beFitting Position: Rear AxleMaterial: PU (Polyurethane)Suspension: for vehicles with sports suspensionSuspension: for vehicles with M-technology
£9.42
VAT inc.
Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension SWAG 10560019SWAGRubber Buffer, suspensionSWAGArt-Nr: 10560019Inner diameter [mm]: 109,0 mmInner diameter [mm]: 71,0 mmOuter diameter [mm]: 113,0 mmQuantity: 10Thickness [mm]: 23,0 mmThickness [mm]: 47,0 mmAdditional Info: 1.880.344, 7.8344, for coil spring, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., See Also VR-D674H for 8Amp Field Version, These products are designed to be used as originallyWeight [kg]: 0.23 kgColour: BlackMaterial: ElastomerNumber of Knobs: 4Fitting Position: Front Axle
£4.04
VAT inc.
Available: 10Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Shock Absorber MAGNETI MARELLI 354029070000MAGNETI MARELLIShock AbsorberMAGNETI MARELLIArt-Nr: 354029070000Diameter 1 [mm]: 25 mmDiameter 2 [mm]: 38 mmLength [mm]: 600 mmLength 2 [mm]: 393 mmShock Absorber Mounting Type: Top pinShock Absorber Type: Gas PressureFitting Position: Rear Axle
£19.78
VAT inc.
Available: 10Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 09286FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 09286Inner diameter [mm]: 73,0 mmOuter diameter [mm]: 116,0 mmQuantity: 10Thickness [mm]: 28,0 mmAdditional Info: 1.880.344, 7.8344, for coil spring, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., See Also VR-D674H for 8Amp Field Version, These products are designed to be used as originallyWeight [kg]: 0.167 kgFitting Position: Front AxleNumber of Knobs: 3Material: ElastomerColour: Black
£4.39
VAT inc.
Available: 10Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Shock Absorber MAGNETI MARELLI 356902070000MAGNETI MARELLIShock AbsorberMAGNETI MARELLIArt-Nr: 356902070000Diameter 1 [mm]: 30 mmDiameter 2 [mm]: 45 mmLength [mm]: 556 mmLength 2 [mm]: 343 mmShock Absorber Mounting Type: Top eyeShock Absorber Type: Gas PressureFitting Position: Rear Axle
£16.37
VAT inc.
Available: 9Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageMAGNETI MARELLITop Strut MountingMAGNETI MARELLIArt-Nr: 030607010179
£7.69
VAT inc.
Available: 8Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Showing 1-15 of 45148 Products