Struts/ Rods
2 036 products
Rod/Strut, wheel suspension
Art-Nr: 1550200200
Rod/Strut: Guide Rod
Fitting Position: Upper
Fitting Position: Rear Axle left and right
£14.30
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 15 working days
HT: About 15 working days
Add to wishlist
Tie Bar Bush
Art-Nr: V20-0444
Fitting Position: inner
Fitting Position: Rear Axle Upper
Fitting Position: Left and right
Steering arm type: for control arm
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,091 kg
Packaging width [cm]: 8,3 cm
Packaging height [cm]: 9 cm
Mounting Type: Rubber-Metal Mount
£5.43
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Tie Bar Bush
Art-Nr: V30-1152-1
Fitting Position: Front Axle
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,085 kg
Packaging width [cm]: 3,17 cm
Packaging height [cm]: 4,35 cm
Mounting Type: Rubber-Metal Mount
£3.09
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Bearing, wheel bearing housing
Art-Nr: V20-7207
Fitting Position: Rear Axle Lower
Fitting Position: Left and right
Fitting Position: Outer
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,377 kg
Packaging width [cm]: 6 cm
Packaging height [cm]: 6 cm
Packaging Depth [cm]: 10 cm
£9.39
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V10-7254
Rod/Strut: Coupling Rod
Fitting Position: Front Axle Left
Paired article numbers: V10-7253
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,528 kg
Packaging width [cm]: 10 cm
Packaging height [cm]: 7 cm
Packaging Depth [cm]: 41 cm
£9.36
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V10-7258
Rod/Strut: Coupling Rod
Fitting Position: Front Axle
Length [mm]: 150 mm
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,356 kg
Packaging width [cm]: 7,5 cm
Packaging height [cm]: 7,5 cm
Packaging Depth [cm]: 22 cm
£7.53
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V10-7080
Rod/Strut: Coupling Rod
Fitting Position: Front Axle
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,167 kg
Packaging width [cm]: 7,8 cm
Packaging height [cm]: 4,2 cm
£9.95
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V10-7255
Rod/Strut: Coupling Rod
Fitting Position: Front Axle
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Width [mm]: 66 mm
Weight [kg]: 0,578 kg
Thread Length [mm]: 26,5 mm
Required quantity: 2
Packaging width [cm]: 10 cm
Packaging height [cm]: 7 cm
Packaging Depth [cm]: 41 cm
Overall Length [mm]: 370 mm
Outer thread [mm]: M12 x 1,5 mm
Outer diameter [mm]: 10 mm
Material: Steel
£8.42
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V30-7333
Rod/Strut: Pull Rod
Fitting Position: Front Axle Left
Fitting Position: Lower
Paired article numbers: V30-7334
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 2,013 kg
Thread Size: M14x1,5
Supplementary Article/Info 2: with rubber mounting
Packaging width [cm]: 14 cm
Packaging height [cm]: 10,5 cm
Packaging Depth [cm]: 50 cm
Overall Length [mm]: 470 mm
Material: Aluminium
Height [mm]: 95 mm
for OE number: 211 330 4311
£34.03
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V30-7334
Rod/Strut: Pull Rod
Fitting Position: Front Axle Right
Fitting Position: Lower
Paired article numbers: V30-7333
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Width [mm]: 100 mm
Weight [kg]: 2,013 kg
Supplementary Article/Info 2: with rubber mounting
Steering arm type: Control Arm
Packaging width [cm]: 14 cm
Packaging height [cm]: 10,5 cm
Packaging Depth [cm]: 50 cm
Overall Length [mm]: 470 mm
Outer thread [mm]: M14 x 1,5 mm
Material: Aluminium
Height [mm]: 95 mm
for OE number: 211 330 4411
£34.03
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V30-7542
Rod/Strut: Camber Link
Fitting Position: Rear Axle Upper
Fitting Position: Left and right
Supplementary Article/Info 2: with fastening material
Quantity Unit: Kit
Paired article numbers: V30-7138
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 1,189 kg
Packaging width [cm]: 10 cm
Packaging height [cm]: 7 cm
Packaging Depth [cm]: 41 cm
£20.92
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V30-7262
Rod/Strut: Suspension Rod
Fitting Position: Front Axle Right
Supplementary Article/Info 2: with rubber mounting
Paired article numbers: V30-7261
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,175 kg
Packaging width [cm]: 9,5 cm
Packaging height [cm]: 5 cm
£4.06
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Tie Bar Bush
Art-Nr: V20-1040
Fitting Position: inner
Fitting Position: Rear Axle
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,11 kg
Packaging width [cm]: 8,3 cm
Packaging height [cm]: 9 cm
£3.12
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: V30-7130-1
Rod/Strut: Push Rod
Fitting Position: Front
Fitting Position: Lower
Fitting Position: Rear Axle
Height [mm]: 40 mm
Width [mm]: 63 mm
Width [mm]: 370 mm
Additional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
Weight [kg]: 0,858 kg
Packaging width [cm]: 10 cm
Packaging height [cm]: 7 cm
Packaging Depth [cm]: 41 cm
£13.02
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 20 working days
HT: About 20 working days
Add to wishlist
Tie Bar Bush
Art-Nr: 3003332105
Outer diameter [mm]: 35 mm
Inner diameter [mm]: 12 mm
Height [mm]: 67 mm
Fitting Position: Upper
Fitting Position: Rear Axle Right
Fitting Position: Rear Axle Left
Fitting Position: inner
£6.05
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 working days
HT: About 1 working days
Handling time: About 15 working days
HT: About 15 working days
Add to wishlist
Showing 1-15 of 2036 Products
